+ Reply to Thread
Results 1 to 1 of 1

Thread: How to use "UITestCS" sample application

  1. #1

    How to use "UITestCS" sample application


    When we install BioEnableSDK,we get "UITestCS" sample application at the following location:
    "Start->All Programs->BioEnable->SDK"


    This is a demo application,it will be helpful to understand the "Capture" and "Enrollment" Process.
    For start using this application,we need to connect the fingerprint device(e.g.Fingkey Hamster device) to PC.


    A]Open the "UITestCS" sample application:
    Click image for larger version

Name:	1 - Copy..jpg
Views:	48
Size:	83.0 KB
ID:	513

    The above screenshot shows 4 sections:
    1)Style
    2)Select fingerprint for enrollment
    3)Capture callback & finish callback
    4.Message(for Enroll)


    1)Style:

    Style section is used for changing the style of
    "Capture" and "Enrollment" process.
    we can change the popup window setting,capture display settings..etc..etc from this section

    a)Popup:
    when we select "Popup" option,it will show popup window during the "Capture" and "Enrollment" process.
    we can change the popup window setting by the following options,

    i)No Fp Image(only for capture):
    if we "check" / "select" this option then we can not see fingerprint image during the capture process,only we get is the "image quality" and "result"(see 3rd section from above snapshot)

    ii)No top most window:
    if we "check" / "select" this option the top most window will be disappeared from capture and enrollment process.

    iii)No welcome page(only for enroll):
    if we
    "check" / "select" this option then enrollment process does not show a welcome screen,it will skip the following page(see below snapshot)
    Click image for larger version

Name:	welcome screen..jpg
Views:	45
Size:	73.2 KB
ID:	514


    b)Invisible(only for capture):
    this option changes the functionality of "capture" process,if we select this option,we don't get any popup window.

    i)there are two fields namely,"Fp Color" (fingerprint color) and "Bk Color" (back color) which accept the hexadecimal value for color change.by default the "Fp Color" is 000000 (black) and "Bk Color" is FFFFFF (white)
    we can change these fields by entering hexadecimal color codes


    ii)if we select "Invisible only for capture" with "Use external Fp window" option selected, after this click on "Capture" button.then put a finger on the sensor area,we get fingerprint image on the application(see below screen)
    Click image for larger version

Name:	invisble capture&#32.jpg
Views:	48
Size:	89.0 KB
ID:	515


    iii)select "Invisible only for capture" with "Use external Fp window" option unchecked, after this click on "Capture" button then put a finger on the sensor area,we don't get fingerprint image on the application but what we get is the "image quality" and "result"(see 3rd section)

    2)Select fingerprint for enrollment:

    Click image for larger version

Name:	finger selected &#1.jpg
Views:	49
Size:	64.6 KB
ID:	516

    here in this section,we can select the fingers for the enrollment process(following steps shows that how to achieve this):

    1.select fingers for enrollment(here in this case,we have selected both thumbs,see above snapshot)
    2.Click on "Enroll" button.(see above snapshot)
    Now we can enroll both thumbs only.(see below snapshot,which shows that we can capture both thumbs only)
    Click image for larger version

Name:	select finger 3..jpg
Views:	46
Size:	57.4 KB
ID:	517


    3)Capture callback & finish callback:

    a)Capture callback(only for capture):
    it shows image quality in percentage.

    b)
    finish callback:
    when capture process done successfully, it shows a Zero(0) value.
    when capture is not done successfully,it gives a random value.

    4.Message(for Enroll):

    we can give user defined message box at the time of cancellation of enrollment process,.(following steps show that how to achieve this)
    1.Enter a "Message(for Enroll)".(see below snapshot)
    2.Click on "Enroll" button.
    (see below snapshot)
    Click image for larger version

Name:	messsage entered&#.jpg
Views:	50
Size:	79.7 KB
ID:	518


    3.welcome screen will appear, now click on "Cancel" button.(see below snapshot)
    Click image for larger version

Name:	welcome screen ca.jpg
Views:	52
Size:	73.7 KB
ID:	519


    Now the given "Message(for enroll)" displayed(see below snapshot).
    Click image for larger version

Name:	msz..jpg
Views:	47
Size:	10.5 KB
ID:	520
    Last edited by uid.team; 09-06-2011 at 05:48 PM.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts