+ Reply to Thread
Results 1 to 1 of 1

Thread: How to download and install the BioEnable SDK

  1. #1

    How to download and install the BioEnable SDK

    1. How to download the BioEnable SDK.

    We can download the BioEnable SDK from the following link:

    http://www.bioenabletech.com/downloa...oEnableSDK.zip


    Note:the given download is in .zip file format so we need to extract the same.



    2. How to install the BioEnable SDK.


    To install the BioEnable SDK go to "BioEnableSDK\Final BioEnable SDK" folder and run the "setup.exe" to start with the installation process.(following snapshots show the installation steps)


    1)Start the setup by double clicking on “Setup.exe” and then click on "Next" button.
    Click image for larger version

Name:	1..jpg
Views:	70
Size:	49.5 KB
ID:	484


    2)Click on "Next" button to continue the installation process.

    Click image for larger version

Name:	2..jpg
Views:	72
Size:	48.0 KB
ID:	478


    3)To confirm the installation process,click on "Next" button.

    Click image for larger version

Name:	3..jpg
Views:	71
Size:	29.6 KB
ID:	479


    4)After clicking on “Next” button on above screen,wait for current process to complete.
    Click image for larger version

Name:	4..jpg
Views:	70
Size:	29.6 KB
ID:	480


    5)Click on “Close” button to complete the BioEnableSDK installation.
    Click image for larger version

Name:	5..jpg
Views:	72
Size:	32.9 KB
ID:	481



    To see the installed components go to "Start->All programs->BioEnable"(see below snapshot)

    Click image for larger version

Name:	SDK..jpg
Views:	70
Size:	60.3 KB
ID:	483
    1.Document:This particular section is present under "Start->All Programs->BioEnable",these documents are related to BioEnable SDK.
    2.SDK:This particular section is present under "Start->All Programs->BioEnable".
    This section is containing sample applications such as,
    i)BSPDemoCS.exe
    ii)BSPDemoUsingAccess.exe
    iii)IndexSearchDemoCS.exe
    iv)UITestCS.exe
    we can get the source code of above sample applications from the following path:
    "Start->All Programs->BioEnable->SDK->Samples->DotNet->C#"
    Last edited by uid.team; 09-02-2011 at 04:07 PM.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts