+ Reply to Thread
Results 1 to 1 of 1

Thread: Instructions for using BioScan 10 Fingerprint device

  1. #1

    Instructions for using BioScan 10 Fingerprint device

    1. Only place the fingers or thumbs when the appropriate LEDs are orange and stable
    2. Do not Place fingers/thumbs, if there is no LED glowing or LEDs are blinking. LED Blinking indicates that scanner has detected sliding finger or Scanner surface is not clean, in such case when Orange LEDs are blinking,perform following actions to rectify the issue.
    a. Clean the scanning surface with a tissue paper or soft cloth.

    b. Remove fingers and place them back after the LEDs are stable.

    Device at the Acquisition State shown in the following picture:

    Click image for larger version

Name:	P5100540...JPG
Views:	50
Size:	120.3 KB
ID:	377

    Last edited by uid.team; 08-12-2011 at 12:01 PM.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts