User Enrollment from Remote Manager Software.

In order to enroll finger print users from the software u will require one USB
Hammster (HFDU01). This fingure print USB device should be connected along with
appropriate driver installed.

Once the above requirement is achieved , u can easily enroll FP users from
RM software. Following are the steps that u will have to follow while enrolling users:


Log in the RM software.
Go to User Management list.
Click on the "Enroll User" tab.
A user enrollment wizard will pop up.
Fill the necessary information about the user.
Select the appropriate "Authentication Type" by clicking on the appropriate check box.

If u had clicked on the FP check box then in order to enroll the Fingure print click on the "Enroll Fingerprint"tab. A window will pop up requesting u to "Place the first finger" and at the same time the scanner of the USB Hammster will start glowing. Place ur fingure on the USB Hammster when the finger is scanned it will ask u to "Place the second finger". In this case u can place the same fingure again or u can change the finger.

If u had clicked on the PW check box then u will have to enter a 4 digit password in the space provided. Re-enter the same password again in the confermation window space.

If u had clicked on the RF check box then u will have to flash a HID card in front of the HID card reader which u might had connected to TimeScan externally.As soon as u flash a card ,the card number will appear in empty box provided for the card number.

U can even use the combination of above three authentication types. For that u will just have to check on the check boxes beside FP , PW , RF and interlink them using OR or AND.

Click on save button . The process of new user enrollment is completed and this user is updated only in the Remotemanager database not in TimeScan database.

So for updating User in TimeScan make a Right click on user enrolled in software select the option "List of Terminals" select the terminal in which u want to add this user click on "Add" button and press "Ok" and user will get transfered to the TimeScan.