User Enrollment from TimeScan

The steps that u will have to follow are as follows:-


Press the MENU key on the keypad of the TimeScan and enter inside the menu.

Select 1st option called as "User Registration" using UP or DOWN arrow key andPress enter or u can even press key number 1. A sub menu will appear having single option called as "Register User" if the TimeScan is used in NL/NS mode. OR this sub menu will be having four sub options as below if the TimeScan is used in SO mode.

1. Register User.
2. Modify User.
3. Delete User.
4. Delete All.


Select Sub option "Register User" using UP or DOWN arrow key and press enter.
U will be prompted to select the type of the user u want to enroll ,wether Master or Normal. Make the appropriate selection and press enter.

Unit will ask u to enter "User ID". This ID should be unique. Enter ID and press enter.
Note: Set the User ID length and the "FP count=2" according to ur application and requirement before enrolling the users, because once the users are enrolled u will not be able to change the settings.


U will be prompted to enter Group ID. This entry is optional so u can press enter and move ahead.
Now a list of authentiaction types will appear. Like FP(Fingure Print), PW(Password),RF(RF Card),FP & RF,FP & PW, FP & PW & RF , FP OR RF , FP OR PW ,FP OR PW OR RF etc..

Depending on ur application select the appropriate authentication type for the user and then press enter.
If u had selected FP as the authentication type then Scanner will start glowing with LCD displaying "Place FP1 Capturing". Place ur fingure on the scanner.

Again the scanner will start glowing with LCD displaying "Place FP2 Capturing". Place the same finger.
If u had selected PW option then u will have to enter a 4 digit password in the space provided. Re-enter the same password again in the conformation window space.

If u had selected RF option then u will have to flash a HID card in front of the HID card reader which u might had connected to TimeScan externally. As soon as u flash a card, the card number will get stored for that user in the terminal database.

U can even use the combination of above three authentication types. For that u will just have to select the FP , PW , RF.and interlink them using OR or AND.
This completes the process of user registration using TimeScan unit.