View RSS Feed

mobile.team2

Trans v1

Rating: 4 votes, 5.00 average.
Trans v1 is a unique device launched by BioEnable that will revolutionize the way you do business.
Trans v1 is a powerful mobile payment terminal provided with secure ARM9 CPU, 24M large memory, compact design, and supports GPRS, CDMA or Wi-Fi wireless communication methods and multi-application.
The device comes with RS232 serial port with RJ11 connector.So, additional peripherals can also be attached to this port.

Key Features
:

* PCI V1.3, online & offline certified

* EMV2000 Level I & II Certified
* Elegant and slim design, convenient swiping card vertically
* Large capacity battery, over 250 transactions per charge
* Powerful transceiver to capture weak radio signaling to ensure reliable transaction
* Powerful ARM9 (200MHz), 32-bit, outstanding performance in mass data and EMV transactions
* 24MB memory, support downloading many applications simultaneously
* Embedded wireless communication module, GPRS, /CDMA/ WiFi (optional)
* Ergo-designed built-in PIN Pad with extra dust and water proof
* High speed thermal printer, up to 28 lines/sec, support Out-of-paper detection and printing double-layer paper
* Support multi-application, remote download for applications and parameters.



Click image for larger version

Name:	view7.jpg
Views:	1053
Size:	316.8 KB
ID:	607



Letís look at the peripherals that are provided with this device


Click image for larger version

Name:	view21.jpg
Views:	1012
Size:	297.2 KB
ID:	608



Thermal Printer:- The thermal printer uses a 2.25 inch thermal paper for printing. The paper roll resides inside the plastic enclose shown above.


LCD:- The LCD is mainly user for showing different menus, messages etc. Itís a eight line LCD where you can programmatically change the text font. With smallest font, you can display maximum eight lines.


Contactless Card reader:- It supports wide range of contactless cards listed below
  • mifare S50
  • mifare S70
  • mifare ultralight
  • mifare desfire
  • SonyFeliCa

Click image for larger version

Name:	view31.jpg
Views:	1011
Size:	314.0 KB
ID:	609





Smart Card Reader:- You can read a smart card by inserting it into the slot shown above. It supports IC type smart cards.


Magnetic tape card reader:- The device has a swipe type magmatic tape card reader where you can swipe the cards and perform bank transactions, shopping, etc.


Click image for larger version

Name:	view41..jpg
Views:	1047
Size:	62.1 KB
ID:	358


Li-ion Battery:- This is a rechargeable Li-ion battery with 2150mAh, 7.4V ratings. Has more than 40 hours standby time and supports 400 transactions.




Name:  view51..jpg
Views: 966
Size:  84.6 KB



SIM card:- The SIM card is mainly used for GPRS connection which is required for transactions, posting attendance logs from contactless card, etc. It can also be used to send text messages related to transactions and other stuff.


SAM cards:- It is a smart card in a reduced form factor similar to a SIM card. SAM cards are usually used to hold cryptographic . They can also be used to store small data. This device supports four such SAM cards as shown above.


Other Peripherals:- The device comes with RS232 port where you can connect serial fingerprint module which can be used for attendance purpose


Click image for larger version

Name:	transv.jpg
Views:	573
Size:	23.1 KB
ID:	668


Click image for larger version

Name:	27062012274.jpg
Views:	646
Size:	141.8 KB
ID:	669


For more details on "Trans V1 with fingerprint scanner" go to the following link
http://help.bioenabletech.com/entry....ith-FP-scanner



The device specifications are given below:



Network Settings:

At the very first boot, you will be asked to select network connection type GPRS/WiFi.
  1. GPRS Settings:If you select GPRS, you will be asked APN, username, password (enter according to your service provider). Then you will be asked SIM PIN. Leave it blank and if all the credentials are correct, you can get connected to GPRS network. (NOTE: The network speed is completely dependent on your service provider)
  2. WiFi Settings: If you select WiFi, you have two options, manual configure or auto scan network. Auto scan is not recommended as the wifi network may be secured. So it is recommended to use manual configure. Here, you have to enter your access point name, channel and security password. After a short period of time you will get connected to wifi network.
Attached Thumbnails Attached Thumbnails Click image for larger version

Name:	view21.jpg‎
Views:	812
Size:	68.8 KB
ID:	338   Click image for larger version

Name:	view31..jpg‎
Views:	816
Size:	70.8 KB
ID:	339   Click image for larger version

Name:	P7140019..JPG‎
Views:	740
Size:	163.0 KB
ID:	412   Click image for larger version

Name:	P7140027..JPG‎
Views:	743
Size:	50.1 KB
ID:	415   Click image for larger version

Name:	P7140020..JPG‎
Views:	727
Size:	48.0 KB
ID:	416  

Updated 08-09-2012 at 03:22 PM by mobile.team2

Categories
Time Attendance , ‎ Biometrics

Comments

  1. mobile.team2's Avatar
    Possible Usage/Applications:-

    1) Attendance System with fingerprint / Mifare card
    2) GPS Logging System
    3) SMS, Missed Call based systems
    4) Ticketing / Coupon systems